Preparatory posts - 1

Hi ALL !

The list of students who opted for the workshop will be put on the blog tomorrow.


While you are in the workshop you will be needing the following tools :

1. Soldering iron (15 to 25W) : The solder tip must be 2-3mm in diameter
2. Soldering Iron Stand
3. De soldering pump
4. Solder remover wick (copper braid)
5. Solder reel (22swg)
6. Side cutters
7. Wire Stripper
8. Nose Plier  (small pliers)
9. Small flat-blade screw driver
10. A crocodile clip to act as a heat sink
11. Track cutter (a 3mm drill bit fit with a handle)
12. PCB Rubber/Abrasive Rubber for cleaning PCBs
13. Electric Drill - Not immediately required.Don't buy

Can you identify the pictures below and relate them to the tools above ?

Have a nice Day.

A : ___

B : ____

C : ____

D : ____

E : ____

F : ___

G :___

H : ___

I : ___

J : ___

K : ____

That's You :) Fully armed and Dangerous !

Mobile Work-Bench !

(courtesy: http://nisker.net/projects/mobile-electronics-workbench/)